Balance Ultra

1. According to the ISO 22810:2010 standard, the Amazfit Balance Ultra achieves a rating of 10 ATM, for a water-resistance of up to 100 meters, and is therefore suitable for splashes, snow, showering, swimming, and some high-speed water sports. It has passed third-party testing conducted by SGS, and the report number is SUER260300036771. Remove the watch when taking a hot shower or trip to the sauna, since too much steam can affect the seal and make it less water-resistant in future. Do not wear the watch with a leather or metal strap when swimming - when preparing to swim, change to a silicone strap or other suitable type. For more information, please visit the support page at: support.amazfit.com

2. The product has passed a low pressure test, high temperature test, low temperature test, temperature shock test, vibration test and impact test according to MIL-STD-810G-2014 standards. The relevant data on this topic comes from the following report: H202603226849-01EN. Prolonged exposure is not recommended as it may damage the watch and its components.

3. 3,000nit brightness is not supported if battery life is below 30%. Depending on your environment, the watch can reach up to 2,000nit brightness after automatic brightness has been enabled in the watch settings.

4. The battery life may vary according to the settings, operation conditions and other factors. So the actual result may differ from the laboratory data.
Typical usage scenario: Default screen brightness, default watch face, voice assistant off; 24-hour wear/continuous heart rate monitoring (every 5 minutes)/assisted sleep monitoring/sleep breathing quality monitoring (8 hours/day)/stress monitoring; 200 wrist raises to wake the screen daily, 150 message notifications (screen off), 3 call reminders, 5 minutes of screen wake-up operation daily.
Heavy usage scenario: Default screen brightness, default watch face, voice assistant on; 24-hour wear/continuous heart rate monitoring (every minute)/assisted sleep monitoring/sleep breathing quality monitoring (8 hours/day)/stress monitoring; 60 minutes of Bluetooth calls per week, 120 minutes of GPS sports function, 3.5 minutes of flashlight (white light, level 2); 300 wrist raises to wake the screen daily, 150 message notifications (screen on), 3 call reminders, 10 minutes of screen wake-up operation daily.
AOD Mode: Always-on AOD screen, default brightness, default watch face, and voice assistant enabled; 24-hour wear/continuous heart rate monitoring (once per minute)/assisted sleep monitoring/sleep breathing quality monitoring (8 hours per day)/stress monitoring; 60 minutes of Bluetooth calls per week, 120 minutes of GPS sports function, 3.5 minutes of flashlight (white light, level 2); 300 wrist raises to wake the screen per day, 150 message notifications (screen on), 3 call reminders, and 10 minutes of screen operation per day.
Accuracy GPS Mode: Always-on AOD screen off, voice broadcast off, heart rate monitoring and GPS precision enabled (dual frequency, all satellite systems), 20 wrist raises to wake the screen per hour, and 12 kilometer markers per hour.
Power Saving GPS Mode: Turn off Always On Display (AOD), turn off voice broadcast, turn on heart rate monitoring and GPS power saving (single frequency, GPS low power consumption), raise-to-wake screen 20 times per hour, kilometer reminder 12 times per hour.

5. This product and the Zepp App are not medical devices and cannot be used for medical purposes, or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell. 24-hour monitoring of heart rate and blood-oxygen saturation (SpO₂) need to be enabled in the Zepp App. For heart rate monitoring, the user must enable Auto Heart Rate Monitor in the Zepp App, and the minimum value can be set to 1 minute. Abnormal heart rate alerts and the preset value need to be set in the Zepp App. To measure blood-oxygen saturation (SpO₂), please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. SpO₂ alerts are sent if the detected rate is too low compared to the preset value, which needs to be set in the Zepp App, at a minimum of 80%. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement. The 24-hour stress level monitoring needs to be enabled on the watch or in the Zepp App. Alerts for high stress levels are based on the preset value, and prompts for the breathing exercise need to be enabled on the watch. Smart health alerts need to be enabled in the watch settings or Zepp App. To process the one-tap measurement and other manual metric measurements, please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement. Sleep monitoring can record night sleep and naps that last more than 20 minutes. Sleep Breathing Quality tracking needs to be enabled in the Zepp App or in the settings of the watch's Sleep feature.

6. The Balance Ultra can be used as a map browsing tool to import OSM map files. The downloaded offline map must match your real location to be displayed, and a route file must be imported for navigation. The shown straight line back to the start of a journey may not be a practical route to follow due to environmental factors; this is only intended to help you keep track of your position in relation to the start point of the journey. Navigation functions are only compatible with outdoor sports modes. Indoor positioning services are not supported. Positioning speed and accuracy may be affected by the surrounding environment. The number of satellites connected to simultaneously, and specific satellite connections, may depend on your location.

7. Smart recognition of strength training exercises can only be engaged within the Strength Training sports mode. 25 exercises are able to be recognized at time of product release, including: Bodyweight squats, Bodyweight straight arm front squats, Barbell squats, Tricep pushdowns, Bent over rows, Barbell bench press, Sit-up holds, Knee-touch sit-ups, Dumbbell flys, Burpees, Burpee jumps, Overhead tricep extensions, Lying tricep extensions, Lateral raises, Jumping jacks, Lat pulldowns, Deadlift, Push-up, Shoulder press, Pull up, Bicep curls, Seated cable rows, Dumbbell drag curls, Straight-arm pulldowns, Russian twists. If an exercise is not auto-recognized by watch, the Zepp App can provide a list of muscle groups or exercise names to choose from.

8. Corresponding sports modes include: Outdoor Running, Treadmill, Walking, Indoor Walking, Outdoor Cycling, Pool Swimming, Rowing Machine, Elliptical. The accuracy and sensitivity of the workout recognition feature varies from person to person, and are related to the posture and proficiency of the user during their workout. Short workout duration or frequent changes in posture may not trigger the automatic recognition feature. When you are driving a car or taking a bus, or taking part in other such activities, accidental recognition may be triggered if these activities are particularly similar to the selected workout mode. When you are conducting outdoor activities, if the GPS signal is poor or the AGPS data information has not been synchronized with the mobile phone for an extended period, these outdoor activities may be assessed as indoor activities.

9. Training templates and interval training templates are compatible with: Strength training, Outdoor running, Treadmill, Outdoor cycling, Indoor cycling, Rope skipping, Rowing machine, Indoor fitness, Core training, and Stair climbing, Pool Swimming, Mountain Biking, BMX, HIIT, Cross Training, Race Walking, Track Running, Electric Bicycle, Electric Mountain Bike, Gravel Cycling, Road Cycling, Off-Road Cycling, HYROX Training.

10. Connection to peripheral Bluetooth devices only supports devices with BLE connection. Supported devices include: heart rate belts, power meters, cadence meters, cycling speedometers, and thermometers.

11. App availability may vary depending on your country or region, or device.

12. Live Sports Data Broadcast and live broadcast of turn-by-turn directions supports English and Chinese broadcasts; this must be enabled in the watch setting.

13. Alerts and reminders need to be enabled in the watch settings or Zepp App.

14. Due to the device's storage limit, only a maximum of 20 membership cards can be added to the same account. Supported codes include Code 128, Code 39, UPC A, EAN 13, and EAN 8 and QR codes.

15. Morning updates need to be set in the Zepp App or in the watch settings, and the currently supported content is: weather, battery, sleep, schedule, PAI, yesterday's activity.

16. Suitability for, and resistance to, diving is according to EN13319:2000 (report number: SUER260300036771 ), ISO22810:2010 (report number: SHES260300504571 ), and GB/T30106-2013 (report number: SWT2604-05) standards.